地址：佛山市南海区罗村务庄大丰田工业区牛栏尾路二街三号
电话： 13802464279---雷锋 13802464250---董勇
传真：0757-82535516
微信
手机站
网站分享 ：
关于我们
产品中心
新闻中心
更多链接
© 2018 佛山市宝陶机械设备有限公司 网站建设：中企动力佛山 粤ICP备18136776号-2
友情链接 ：
PRODUCTS CENTER
产品中心
开瓷砖加工厂必备机械设备-Small ceramic tile factory equipment combination is recommended
开瓷砖加工厂必备机械设备介绍
瓷砖加工设备很多客户一开始都会遇到的问题，
我想办个瓷砖加工厂，需要什么设备呢？
答：初期办瓷砖加工厂必备的三台机器，
BT-1200型14头圆弧抛光机
BT-1000型数控前后切割机
BT-1200型手动切割机
以上三台设备足够满足一个初期新开的加工厂了。
I want to run a tile processing plant. What kind of equipment do I need?
Answer: there are three necessary machines for ceramic tile processing plant.
1.BT-1200 TYPE 14 HEADS ARC EDGE GRINDING POLISHING MACHINE
2.BT-1000 THPE FULLY AUTOMATIC CONTINOUSLY FRONT & BACK SIDES CUTTING MACHINE
3.BT-1200 type manual ceramic tile cutting machine
下面为大家一一介绍以下三台机器的功能和特点。
Here are the functions and characteristics of the following three machines.
一、圆弧抛光机（十头、十四头）
圆弧抛光机主要用于：磨直边、磨圆边、倒45度角、开防滑槽、梯级砖、地脚线，它可以把任何级别的抛光砖和石材进行弧面加工而成为靓丽的梯级砖和地脚线砖。该机生产过程全自动运作，操作简单方便，可随意调节生产线的速度，可随意调节所加工的圆弧面的大小，亦可抛光45°的斜面，加工宽度从100mm-1200mm内可进行无级调整，弧面大小可随意调整。
1. ARC EDGE GRINDING POLISHING MACHINE (ten heads, fourteen heads)
The arc polishing machine is mainly used in grinding straight edge, grinding round edge, inverted 45 degree angle, opening and preventing sliding groove, cascade brick and foot line. It can process any grade of polished brick and stone to become beautiful ladder brick and foot line brick. The production process is fully automatic, easy to operate, can adjust the speed of the production line at will, can adjust the size of the arc surface at will, also can be polished 45 degrees of the slope, the width of the machining can be stepless in 100mm-1200mm, the size of the arc can be adjusted at will.
二、瓷砖数控前后切割机（数控两刀、型数控三刀）
本机2个刀头，第一把刀头预切，第二把刀切断，使本机加工出来的产品达到精准的效果
瓷砖数控前后切割修边机是我司根据市场需求研发推出的新一代切割设备，它的特点是采用自动调节挡板并由数字控制，当你需要切割不同尺寸的瓷砖时只要在控制面板上输入所需要的尺寸数字，挡板就会自动调节到所需位置，加工出来的产品尺寸准确、切割速度快、精度高、成本低，是瓷砖深加工行业的首选设备。
2. FULLY AUTOMATIC CONTINOUSLY FRONT & BACK SIDES CUTTING MACHINE (front & back double sets blades , front & back three sets blades).
Double sets blades of this machine, the first knife head pre cut and the second knife cut off, processed the products to achieve precise results
This machine is a new generation of cutting equipment developed by our company ,according to the market demand. It is characterized by the use of automatic control baffle and digital control. When you need to cut different sizes of tiles, as long as you enter the required size numbers on the control panel, the baffle will automatically adjust to the required position, the processed product is accurate in size and cutting speed. Fast, high accuracy and low cost are the first choice for ceramic tile deep processing industry.
三、1200型切割机（单介机、多功能切割）
主要用于瓷砖切割
3.BT-1200 type ceramic tile cutting machine( 800(1200)TYPE SIMPLES CUTTING MACHINE or 800(1200) TYPE MULTIFUNCTION CUTTING MACHINE)
4. The things to be prepared by the ceramic tile processing plant:
100-500 square meters of plant, 380V voltage, 30-50 kilowatts of electricity, 1 pools (15-20 cubic), 1 air compressors, 8 kilograms of pressure from 2.2Kw, 1 1.5Kw of water pump, and copper wire for 16 square.
Total power: about 30-50Kw
The power is about 25 degrees per hour, and the processing cost is about 0.1-0.2 yuan.
Processing fee collection:
The cutting cost is 1 yuan for one cut or 600 size brick cost 0.6 yuan, and the 800 size brick cost 0.8 yuan.
About the 45 degree chamfering,some some places is 2 yuan for 1 meter and some places is 2.5 yuan or 3 yuan, or even higher
About The grinding circle some places is 1.5 yuan 1 meter and some places is 2 yuan or 3 yuan or even higher.
The opening and preventing grooves are calculated by 1 meters and 0.5 yuan each.
Because the processing fee of each place is different, and how to charge specifically, we must make an accurate quotation according to the local situation.
